How To Replace A Shed Roof In Bracknell

Are you experiencing leaks or damage to your shed roof in Bracknell, Berkshire? If so, you may need to consider replacing your shed roof to prevent further damage to your property. A1 Roofing Bracknell are a roofing company in Bracknell that offer shed roof replacement services to homeowners in the South East of England. In this guide, we will take you through the steps of replacing a shed roof.

Introduction

Shed roofs are generally made of felt, which can deteriorate over time due to the effects of sunlight and rain. They can also be damaged by tree branches, animals or general wear and tear. If you notice any leaks or damage to your shed roof, it's important to take action before the problem gets worse and causes damage to your property. Replacing your shed roof is a cost-effective solution that will improve the overall appearance of your shed, and protect your belongings from the elements.

Step 1: Safety First

Before beginning any roofing work, it's important to prioritize safety. Make sure you have a stable ladder and secure footing. Wear non-slip shoes and consider using a harness or safety line for added protection.

Step 2: Remove the Old Roofing Material

The first step in replacing a shed roof is to remove the old roofing material. This will typically be felt that's been nailed or stapled to the roof decking. Use a hammer or crowbar to carefully remove any nails or staples, making sure not to damage the roof decking. If the felt is stuck down, you may need to use a roofing knife to cut it away.

Step 3: Inspect the Roof Decking

Once the old roofing material has been removed, you should inspect the roof decking for any damage or rot. If you notice any damage, it's important to replace the affected areas before continuing with the new roof installation.

Step 4: Measure and Cut the New Felt

Measure the length and width of your shed roof, and add an extra 6 inches to each dimension. This will ensure that you have enough felt to cover the entire roof, and to allow for some overhang at the edges. Cut the felt to size using a sharp knife or scissors.

Step 5: Install the New Felt

Starting at one corner of the roof, lay the felt onto the decking and nail it down with roofing nails. Make sure to keep the felt taut and smooth as you work your way across the roof, adding more nails as needed. Overlap adjacent strips of felt by at least three inches. When you reach the end of the roof, cut the felt with a knife, leaving a three-inch overhang.

Step 6: Finish the Edges

Fold the excess felt over the edges of the roof and nail it down securely. You may need to use a hammer or staple gun to secure the felt in place. Use a roofing knife to cut excess felt away from any vents or pipes on the roof.

Step 7: Clean up

After all of the felt is installed, check for any remaining nails or staples that need to be removed. Sweep or vacuum up any debris from the roof or the surrounding area.

Conclusion

Replacing a shed roof may seem like a daunting task, but it's actually a relatively simple process that can be completed in a few hours. If you are not comfortable doing the work yourself, it's always best to contact a professional roofing company like A1 Roofing Bracknell. Not only do we have the experience and expertise to handle any roofing job, but we can also save you time and money by getting the job done right the first time. Contact us today at 01344 534049 or email us at [email protected] to schedule your shed roof replacement.