We provide the best Roofing in the Bracknell area.
We are here for all you Roofing Service needs in Bracknell.
Are you looking to secure the edge of your roof in Bracknell? Fitting a dry verge system to your existing roof will solve your problem. Wet verges, which use mortar, can deteriorate over time due to weather conditions, which can cause water damage. However, dry verge systems provide protection against the elements, which last for decades.
A1 Roofing Bracknell is a reputable roofing company in Bracknell. Our team of experts are able to fit dry verge systems to your existing roof to protect your home from water damage. In this article, we will guide you through the process of fitting a dry verge system to your existing roof in Bracknell.
The verge is the outer edge of the roof where tiles or slates meet the wall. It's a vulnerable area that can cause problems if not secured correctly.
A wet verge is an old method of securing the verge by using mortar. Over time, the weather can cause the mortar to deteriorate and become less secure.
A dry verge system is a more modern method of securing the verge. It is a roofing component made of plastic or metal and is installed onto the batten at the edge of the roof. This component secures the tiles or slates and holds them in place, providing a barrier against the elements.
Before you start, you'll need to gather a few tools and materials:
If you have a wet verge, you'll need to remove it completely before installing the dry verge system. Use a hammer and chisel to break the mortar and remove any debris.
The next step is to install the dry verge units. Start by fixing a batten to the eaves of your roof. This will provide a suitable base to attach the dry verge units.
Attach the dry verge units to the batten, starting at the outer end of the roof. Work your way towards the ridge, making sure to leave a gap between each unit. The gap should be no more than 38mm.
To secure the dry verge units in place, use screws and sealant. Drill holes through the units and batten, and insert screws into the holes. Apply a sealant around each screw hole to prevent water damage.
Once you've attached all the dry verge units, finish the installation by applying sealant to the top of the units. This will prevent water from getting underneath the units and causing damage.
At A1 Roofing Bracknell, we have the experience and knowledge to fit dry verge systems to your existing roof. We have been serving the Bracknell area for many years and have built up a strong reputation for delivering high-quality roofing solutions.
Our team of experts are trained to fit dry verge systems safely and efficiently while causing minimal disruption to your daily life. We also offer competitive pricing and all our work is guaranteed.
If you're looking for a reliable roofing company to fit a dry verge system to your existing roof in Bracknell, then look no further than A1 Roofing Bracknell. Our team of experts are available to discuss your requirements and provide you with a free quote.
You can contact us by phone on 01344 534049 or email us at [email protected]. Alternatively, you can visit our website at a1-roofing-bracknell.co.uk and create an account to receive updates and discounts.
Don't risk the safety and security of your home by leaving your roof vulnerable to the elements. Contact A1 Roofing Bracknell today to secure the edge of your roof with a dry verge system.